Decalcifying: After every third use rinse the machine's boiler out with fresh water in order to flush out limescale deposits. Depending on the hardness of the tap water you should descale the machine at certain intervals with Kärcher descaling sticks.
1. First undertake deep cleaning before using a steam cleaner for the first time. Clean off the entire surface with the hand nozzle and steam cloth, and then with rub with a dry towel. Tip for winter: Warm up very cold windows from a distance of about 5 cm.
2. Then steam the glass surface with the window nozzle and remove it with the rubber lip of the window tool by moving it
upwards and downwards.
3. Do not clean windows from the outside though, steam cleaners are indoor products
and for safety reasons may not be used outside!
4. The next time you clean your windows everything should be easier after the initial clean. Use the window nozzle to steam the
interior remove window surface from top to bottom at running widths of 10 cm.
5. Then clean off the window with the rubber lip from top to bottom – then clean the bottom of the window by moving it sideways. Dry the rubber lip with a towel in order to prevent streaks from forming.
6. If after using the rubber lip a few residual water drops remain on the surface, don't worry. You can easily wipe them away with
the towel.
