| - Safety inspection incl. inspection report and inspection sticker
- Inspection of all functions and settings
| - Check pump for leaks, water and oil side
- Install pump set, oil change, replace ignition electrode, burner nozzle and water shortage protection
- Check/clean float tank, cleaning agent tanks and fuel tank
- Adjust/check safety valve and pressure switch
- Reseal overflower, clean strainers and filters
- Adjust fuel pump and burner, replace burner filter
- Check line system and trigger gun for leaks, fit new O-rings for HP hose, spray lance and nozzle
- Machines with petrol or diesel drive, in addition: Change engine oil, replace oil, air, fuel filters and spark plug (model-dependent).
- Check operating speed.
- E-heating, in addition: Check heating rods.
- Gas machines, in addition: Check internal gas lines for leaks, replace glow and ionisation electrode, make burner measurements and settings.
| - All repairs required to make the machine ready for operation, or to maintain operational state.
- Exceptions: High-pressure nozzle, special accessories, cleaning agent and consumables.
|
| - Safety inspection incl. inspection report and inspection sticker
- Inspection of all functions and settings
| - Clean and check batteries, grease poles
- Adjust brush mirror, check mounting
- Check and adjust drive belt
- Clean water distribution rail
- Check and clean float switch
- Clean fluff filter
- Check/adjust cleaning agent dosing unit
- Check/adjust steering and brake (model-dependent)
- Adjust squeegee
- Machines with diesel drive, in addition: Change engine oil, replace oil, air and fuel filters.
- LPG drive, in addition: Check leak-tightness, pressure and function of the LPG system.
| - All repairs required to make the machine ready for operation, or to maintain operational state.
- Exceptions: Brushes, suction lips, batteries, cleaning agents and consumables.
|
| - Safety inspection incl. inspection report and inspection sticker
- Inspection of all functions and settings
| - Clean and check batteries, grease poles
- Adjust side brush and main sweeper roller
- Check tension, wear and function of drive belts
- Clean filter
- Replace sealing lips on sweeper roller box
- Check, adjust and lubricate Bowden cables
- Check and adjust drive, steering and brake
- Change brake fluid (model-dependent)
- Check wheels for wear / damage
- Machines with petrol or diesel drive, in addition: Change engine oil, replace oil, air, fuel filters and spark plug (model-dependent).
- Check / replace V-belt / toothed belt on combustion engine (model-dependent)
| - All repairs required to make the machine ready for operation, or to maintain operational state.
- Exceptions: Roller brushes, side brushes, batteries, cleaning agents and consumables.
|